INPUT AC Reactor for Chziri Frequency Converter

AC Input Reactor 
The input AC reactor is a current-limiting device mainly used for the input side of the drive so as to protect the exchange drive from the influence of the transient overpressure. It can also reduce the surge and peak current .increase the real power factor ,restrain the harmonic wave in power grid and improve the function of the input current waveform .

High performance foil winding structure .low direct current resistance ,strong resistance to short circuit and good overload ability in short time characterizes this input AC reactor .For above class composite insulating materials are used to maintain reliable performance of the product under harsh working conditions, the design of the facility is characterized by low magnetic flux density ,excellent linearity and strong overload capacity ,Moreover, the cooperation of the design and vacuum pressure impregnation process reduces the noise of the reactor which also possesses the advantages of low consumption ,high efficiency of low temperature rise .the iron core employs the cold rolled oriented silicon steel sheet .

Technical Data
1.Rated operating Voltage: φ3/380V/50Hz
2.Rated operating current: 5A to 1600A
3.Operating environment temperature:40ºC
4.Dielectric strength: Core-wingding 3000VAC/50Hz/5mA/10S
No flashover breakdown(factory test)
5.Insulation Resistance>1000VDC, Insulation resistance value >100MΩ.
6.Noise of the reactor is less than 65dB ( Tested at the point with a horizontal distance of 1 meter away from the reactor).
7.Level of protection:IP00
8.Insulation class: Above F
9.Executive standard of product:GB19212.1-2008,GB19212.21-2007.GB1094.6-2011.

Company Information

 

FAQ

Q1: Can I get some samples? 

A1: Yes, Sample order is available for quality check and market test .But you have to pay for it.

Q2: What’s delivery time? 

A2: It usually takes about 3-5 working days for small order and 10-15 days for big order.

Q3: What’s your payment terms? 

A3: We usually accept all kinds of payment terms .Such as T/T,L/C, Western Union, Cash.

Q4: What’s your warranty terms? 

A4: We offer 12 months warranty time.

Q5: Do you have the products in stock? 

A5: Depends on your request, we have standard models in stock. Some special products and big order will be newly produced according to your orde.

Q6: Can I mix different power in one container? 

A6: Yes, Different models can be mixed up in one container, even one order.

Q7: How does your factory do the quality control? 

A7: Quality is priority, we always attach the importance to quality control from the beginning to the end of the production. every product will be fully assembled and carefully tested before packing and shipping.

Q8: Can you sell spare parts? 

A8: If you are using CHZIRI products. we can sell spare parts to you. But we couldn’t sell the half-finished products.

Q9: I would like to know if you have a partner for export? 

A9: Yes. CHZIRI Electrical have the right to export and can sell electrical product all over the world.

Q10: Can you make the inverter and soft starter control boards (switchgear)? 

A10: Yes. We have a lot of experience to design frequency inverter and soft starter cabinet according to your request . But you can send us the wiring diagram.

Q11: Can the inverter connect with computer? 

A11: Yes. All inverters have built-in RS485 port , and support Modbus communication protocol.

Q12: How can I trust you ? 

A12: The core of CHZIRI electrical culture is honesty and loyalty. Our company has been audited and approved ISO9001,CE.CCC. Assessment report will could be sent to you by e-mail .also. We are the made-in-china’s gold supplier since 2008.Now we have clients all around the world.